Product Categories
(Total 12 Products for Flowing Agent For Powder Coatings)
Additive Flow Agent for Powder Coating
Application: It does not contain any accelerating wet agent. The user can adjust the formulations according to the real instance. The recommended dosage is 0.8～1.2% of the total weight. Specification:
Benzoin Auxiliary Agent for Powder Coatings
Application: It is an organic compound which is used for degassing in powder coatings. It can also be used as disinfector or used in other chemical analysis.As a degas agent should be add to premix with 0.3~0.8% of total frmulation for degassing bubbles during extrusion to eliminate or reduce those imperfections like...
Outdoor Chemical Powder Coatings Curing Hardener TGIC
Application: TGIC (triglycidyl isocyanurate) is a heterocyclic epoxy compound with a molecular weight of 297 (CAS number: 2451-62-9). Has excellent heat resistance, weather resistance, bonding and high temperature performance. Specification: Appearance
Matting Agent for Polyester Tgic Powder Coatings
Application With proper resin, it can provide lowest 6% (60°) gloss (suggested to choose slow curing polyester, should
not be used alone with fast curing polyester). Fine and smooth surface.
Good stability for baking, recommended to use on anti-yellowing condition.
Outstanding mechanical properties, much better...
Matting Agent for Indoor Powder Coatings
Application It can provide lowest 6% (60°) gloss (suggested to choose slow curing polyester, should
not be used alone with fast curing polyester).Fine and smooth surface. Good stability for baking, recommended to use on anti-yellowing condition.
Outstanding mechanical properties, much better scratch/friction...
Powder Coatings Additives Matting Agent
Application Good stability for baking, recommended to use on anti-yellowing condition. Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system.
Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Product Specification:...
Matting Agents with Acrylic Polyester Resin for Coatings
Application Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system. Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Product Specification: Appearance:White powder
Softening Point:100~ 125℃ Solid Content:98.5% Min Recommend...
Matting Agent for Powder Coating
Application Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system. Product Specification: Appearance:White powder
Softening Point:100~ 125℃ Solid Content:98.5% Min Recommend...
Powder Coating Good Flow Matting Hardener
Application In the Epoxy system,the glass can be achieved from 5%-10% and hybrid system,from 10%-70%(or higher)by using newadd-02051. It is a salt of polycarboxylic acid with cyclic amidine.This hardener is a suitable formulation can produce the very good flow and properties matt or semi-matt finish in epoxy or Hybird...
Matting Agent Curing Hardener for Powder Coatings
Application This hardener is a suitable formulation can produce the very good flow and properties matt or semi-matt finish in epoxy or Hybird coating.Different gloss can be obtained by suitable adjusting of the formulation.The hardener can be used both in pure epoxy and hybrid(Epoxy polyester) system. Product...
Polyester Powder Coating Grade Hardener Curing Agent Tgic
Application: It has good weather resistance due to its very stable chemical properties. Mainly used as Curing Agent for pure polyester powder coating, also used to produce electrical insulation materials, laminated sheeting, printed circuits, tools, adhesives,, stabilizer for plastic, etc. Specification:
Chemical Powder Paint Additives Benzoin
Application: It can be used as disinfector or used in other chemical analysis. NEWADD-0203/2, is an organic compound which is used for degassing in powder coatings.
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Ms. Aileen Wang
Tel:86-0535-6105930
Fax:86-0535-6105932
Mobile Phone:+8613780950892
Email:sales@yuanlicorpcn.com
Address:No.28, Qunying Rd, Xituo Area.Yantai, China, Yantai, Shandong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
