Product Categories
(Total 12 Products for Matting Hardener For Powder Coating Additive)
Matting Hardener for Powder Coating Matt Effect
Application It is a salt of polycarboxylic acid with cyclic amidine.This hardener is a suitable formulation can produce the very good flow and properties matt or semi-matt finish in epoxy or Hybird coating.Different gloss can be obtained by suitable adjusting of the formulation.The hardener can be used both in pure...
Matting Agent for Polyester Tgic Powder Coatings
Application With proper resin, it can provide lowest 6% (60°) gloss (suggested to choose slow curing polyester, should
not be used alone with fast curing polyester). Fine and smooth surface.
Good stability for baking, recommended to use on anti-yellowing condition.
Outstanding mechanical properties, much better...
Matting Agent for Indoor Powder Coatings
Application It can provide lowest 6% (60°) gloss (suggested to choose slow curing polyester, should
not be used alone with fast curing polyester).Fine and smooth surface. Good stability for baking, recommended to use on anti-yellowing condition.
Outstanding mechanical properties, much better scratch/friction...
Powder Coatings Additives Matting Agent
Application Good stability for baking, recommended to use on anti-yellowing condition. Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system.
Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Product Specification:...
Matting Agents with Acrylic Polyester Resin for Coatings
Application Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system. Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Product Specification: Appearance:White powder
Softening Point:100~ 125℃ Solid Content:98.5% Min Recommend...
Matting Agent for Powder Coating
Application Outstanding gloss stability and reproducibility, satisfy wide ranges of extrusion processing. Outstanding mechanical properties, much better scratch/friction resistance than PE/GMA matting system. Product Specification: Appearance:White powder
Softening Point:100~ 125℃ Solid Content:98.5% Min Recommend...
Chemical Additives Hardener Outdoor Physical Matting Agent
Application It is a salt of polycarboxylic acid with cyclic amidine.This hardener is a suitable formulation can produce the very good flow and properties matt or semi-matt finish in epoxy or Hybird coating.Different gloss can be obtained by suitable adjusting of the formulation.The hardener can be used both in pure...
Solid Benzoin for Powder Coating
Application: Benzoin is to eliminate the bubbles in the melting powder coating, i.e. eliminate the key factor resulting in film pinhole.It can be applied in all categories of powder coating.Application method: mix with other ingredients directly before extrusion.The recommended dosage is about 0.3~0.8% calculated on...
Solid Additive TGIC for Powder Coating
Application: It is used as a cross-linking curing agent for pure polyester powder coating, and the dosage is about 7%-9% of the weight of pure polyester (determined by acid value). Specification: Appear
Chemical Additive Benzoin for Powder Coating Hardener
Application: As a degas agent should be add to premix with 0.3~0.5% of total frmulation fordegassing bubbles during extrusion to eliminate or reduce those imperfections like pinholes. It can be applied in all kind of powder coatings. The acurate amount should be obtained in lab. The dosage should be properly...
Hardener Tgic Outdoor Powder Coatings and Spray Paint
Application: HARDENER TGIC is a Curing Agent for Powder Coatings systems that combined with adecquate Polyester resins provides coating systems with good outdoors durability and mechanical properties,excellent flow and high gloss. It is mainly used as Curing Agent for pure polyester powder coating, also used to...
Benzoin Auxiliary Agent for Powder Coatings
Application: It is an organic compound which is used for degassing in powder coatings. It can also be used as disinfector or used in other chemical analysis.As a degas agent should be add to premix with 0.3~0.8% of total frmulation for degassing bubbles during extrusion to eliminate or reduce those imperfections like...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Ms. Aileen Wang
Tel:86-0535-6105930
Fax:86-0535-6105932
Mobile Phone:+8613780950892
Email:sales@yuanlicorpcn.com
Address:No.28, Qunying Rd, Xituo Area.Yantai, China, Yantai, Shandong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
